Fit Small Standard Large Fits as expected Season Winter Aut/Spr Summer All-season protection Style Urban Touring Trail Climate regulated for a variety of conditions Can't find your size? We only list products we can ship within 24 hours on our site. If you’re after a size or colour we don’t have showing available, give us a call or drop us an email on the contact us page – we can usually get other sizes out within 72 hours. Contact Us Contact Us Product Details $2,199.00 Product Features 3L GORE-TEX Pro fabric Its unique 100% ePTFE-based microstructures are durably bonded to the outer material and a specially developed inner lining on the inside. The centerpiece of this technology is the new GORE-TEX Pro membrane. The Gore-Tex Pro membrane is bonded to the face fabric (outer shell) and a Micro Grid backer fabric. This is the secret to GORE-TEX Pro - it doesn't use a PU membrane, which means that it doesn't require the membrane to be wet before it starts to breathe, increasing performance. The Micro Grid backer fabric is also exclusive to GORE-TEX Pro and it gives less internal abrasion and snag resistance, whilst improving breathability and decreasing weight. It also allows the garment to slide easily over mid layers and feel more comfortable on the skin. It was created for maximum durability and protection. VCS|aquadefence system (patented) It was designed to help improve ventilation on garments that required the top level of waterproofing. Which is always a challenge. That said, the GORE-TEX approved system is one of the best – if not the best – available in motorcycle clothing. When opened, the Aquadefence system allows direct ventilation to the body. When the zipper or panel is closed, it fastens onto the incorporated rain gutter. The jacket is then 100% wind and waterproof. When the panel or zipper is closed the rain gutter will stop the water from entering via the ventilation holes, thereby keeping you dry and comfortable (EU patent EP 2574249, US patent US 13/630.520). Detachable storm collar The detachable storm collar - which protects the neck of the rider against the elements - can be zipped off and stored in the back pocket when not needed. SEEFLEX™ CE-level 2 protectionCertified CE-level 2 according to the norm EN1621-1:2012, the SEEFLEX™ protector is an innovative creation from the in-house R&D department. The norm also tests the impact levels in various /- temperature ranges. The SEEFLEX™ protectors easily surpass the norm without sacrificing wearer comfort. Because of its open-structure composition, they’re breathable and allow air to easily pass through; helping to prevent the rider from building up an unnecessary heat. Prepared for divided SEESOFT™ CE-level 1 chest protectorAn easy upgrade for additional protection. The prepared pockets are tailor-made to house the SEESOFT™ armour, giving riders that extra peace of mind when on the road. They can be put in or taken out easily and quickly and don’t interfere with daily riding activities. Protective print To increase the abrasion resistance on the high-impact areas of the outer shell, we've added a protective, multi-layer print as an extra layer of protection. SEESOFT back protector The SEESOFT CE-Level 2 back protector insert is designed to absorb variable impacts without compromising on comfort, ventilation or freedom of movement. The highly impact-resistant blend of Nitrille and Polynorbornene rubber results in a memory foam that is multi-impact rated and CE certified to the highest level (EN 1621-2:2014 - level 2). Ready for Avertum Tech-Air® airbag system - ONE SIZE UP If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
